PIKA TECHNOLOGIES INC.
Printer Friendly Printer Friendly RSS Contact Us Contact Us   Search Search Home
 
       
   
Low Density Analog Boards with DSPs



The PIKA Low Density Analog Board with DSPs
(formerly InLine) is a cost effective choice to support a wide range of capabilities from the needs of basic voice applications to enhanced speech applications. 4 ports of fax are included with every board at no extra cost!

This low-density board with DSP based media processing applications and API is ideally suited for basic voice processing applications to enhanced speech applications. Examples of applications include:

  • Small fax system
  • Predictive dialer
  • Operator console
  • IVR/voice mail system



Features and Benefits


see 360° rotating board
Download pdf Datasheet

  • Single slot PCI card
  • S/W configurable as 4 l/s interfaces or 3 l/s interfaces plus 1 headset port
  • DSP based echo cancellation and RTP packetization available (suitable for analog to IP gateway applications)
  • Advanced DSP based media processing capabilities include PIKA’s voice, tone, fax, conferencing
  • Windows and Linux development environments via PIKA’s low and high level APIs

Functional Chart

Functionality Specifications
Analog line circuits User configurable 4 loop start or 3 loop start +1 headset/handset
Host interface bus type PCI
DSPs:
On-board DSPs
Chip Type
Memory
Clock Speed
Instruction Speed

1
Motorola 56303 (see note)
128 K
100 MHz
100 MIPs
Supported OS Windows 2000/XP/2003
Red Hat 7.3/Enterprise 4 SuSE 9.3 distributions of Linux

Note: DSP applications are independent programs that perform operations such as fax, VAD, echo cancellation, dual tone multi frequency (DTMF) detection, speech compression, conferencing, and more. The number of supported applications is limited only by the amount of available memory and real time.

Technical Specifications

Host Interface
PCI Interface PCI 32 bit target/initiator V2.2 compliant
33 MHz bus speed
Network Interface RJ14 connectors
RJ22 headset/handset connector
Headset Interface RJ22 headset/handset connector; does not require external power supply
Loop Start Trunk Interfaces (CO Interface Circuit) Headset/handset connection configurable via software during set up
On-hook audio reception
Ground button (Euro version only)
Gain pad
DC Resistance
North America 360-140 ohms over 15-120 mA typical
Euro version 470-154 ohms over 14-130 mA typical
Loop range 0-2000 ohms
AC impedance: 600 ohms ( North America ) or complex (Euro version)
Supervision loop current drop, battery reversal, ringing
Signaling off-hook, flash, DTMF
Loop current range
North America 15-120 mA 
Euro version: 14-130 mA
Compliance and Capabilities
FCC part 15 and FCC Part 68
Industry Canada CS-03 CSA C22.2 no. 950 NRTL/C
TBR21
EU 55022:1998 Class B EU 55024:1998 EU 60950:1992
2002 / 95 / EC RoHS 6
DSP
Motorola 56303 DSP Software reset on per DSP basis
MTBF
4L/3L plus headset North America: 47 years
Euro version: 45 years
Power Requirements
355mA
Environmental Requirements
Operating Temperature 0 °C to +60 °C
Storage Temperature -20 °C to +85 °C
Humidity: 5 to 95%, non-condensing
Media Capabilities
Play and record
DTMF, tone, speech detection
DTMF, tone generation
Fax
RTP, IP/SIP
Integration with Asterisk and Skype technologies

RoHS
All PIKA products are RoHS compliant.

 
 
PIKA