PIKA Digital T1/E1 cPCI high performance boards provide integration of voice and fax for up to 240 digital channels over octal span T1/E1 network connections. Our digital T1/E1 cPCI series of high-density boards enable voice and fax services by way of connectivity to TDM and IP networks. Digital cPCI boards have an independently scalable DSP architecture and market leading port densities. An optimal building block for next generation voice and fax applications, the digital T1/E1 cPCI delivers all the required processing horsepower for even the most demanding of services.  The digital T1/E1 cPCI platform consists of a main card providing T1/E1 framing and DSP resources, along with a rear panel providing network terminations and protection. Front faceplate status lights enable on-site status monitoring. The rear panel provides network termination with line conditioning and protection for worldwide implementations. CSU or DSU options are supported. PIKA Digital Boards, DSP based media processing applications, and the MonteCarlo SDK represent a complete and scalable set of reliable building blocks for the development of feature-rich communications solutions.

see 360° rotating board Download pdf Datasheet

Features and Benefits

• Connects to TDM and IP networks
• Octal span
• Total bandwidth of up to 12.352 Mbits in T1 mode and up to 16.384 Mbits in E1 mode
• Enhanced DSP support for next generation applications
• H.110 compliant - up to 512 simultaneous half duplex connections can be made between any of the 4096 CT bus timeslots and any of the local timeslots
• Depending on configuration, the card comes pre-configured with 4 or 8 on-board DSPs and can accommodate up to 4 V-Engines with 6 more DSPs on each daughter card
• Resource based driver model
• Programmable tone detection and generation for wider international support
• Integrated call progress analysis
• Dynamic adjustment of audio gain for improved loss and level control
• 25% of the fax ports are enabled for free

Key benefits

• Windows or Linux development environments
• Market leading port densities with integrated voice, fax, and conferencing
• Support for 2048 full duplex channel switching to improve overall system performance and flexibility
• Single, low level API works across the portfolio of PIKA voice boards
• Granular API software architecture for maximum design control and application performance
• Advanced DSP applications support
• Flexible architecture allows DSP resources to be dynamically allocated on a per channel basis
• High call start and simultaneous play/record performance for improved call processing capabilities

Technical Specifications
T1/E1 Spans	8
Voice Bus Type	H. 110
Bus Data Rate (H.110)	2,4,8 MHz
CT Bus Switch Connections	up to 512 simultaneous half duplex connections can be made between any of the 4096 CT bus timeslots and any of the local timeslots
Data Bus Type	cPCI
Maximum V-engines	2
DSPs: Onboard DSPs Chip Type Memory Clock Speed Instruction Speed	8 Motorola 56303 128 K 100 MHz 100 MIPS
Supported Operating Systems (OS)	Windows 2000/XP/2003 Linux

 Note: DSP applications are independent programs that perform operations such as dual tone multi frequency (DTMF) detection, speech compression, conferencing, and speech recognition or tone detection. DSP applications are a key ingredient of the innovative AllOnBoard architecture. The number of supported applications is limited only by the amount of available memory and real time.

Model	PrimeNet   MM   cPCI   C8080T
Digital Spans/ Board	8
Standard Voice Processing/ Board	288
Expansion Options	Add up to 2 V-Engines. With 6 DSP voice resources on each V-Engine, you can scale to 768 channels depending on the voice resources needed for your application
Rear Panel Termination	RJ48, T1/E1 compliant

Technical Specifications
cPCI Interface	H.110 compliant telephony bus Conforms to PICMG 2.0 and 2.5 specifications cPCI 32 bit target/initiator V2.2 compliant 33 MHz bus speed
Network Interface
Physical Connection	Rear panel RJ48
Impedance matched for T1/E1 connections
CSU/DSU mode software selectable
DSX-1 or DS-1 interface

Network Types

Proprietary National ISDN-1, ISDN-2, ISDN-3 Japan/NTT France Germany ETSI EuroISDN United Kingdom Australia

Framing
T1	ESF, SF/DC4
E1	CRC4, Basic

Protocols
T1/E1 ISDN PRI
T1/E1 CAS (RBS,MFR1, MFR2, DTMF/Pulse Dialing)

Compliance and Capabilities

FCC Part 15 and FCC Part 68 Industry Canada CS-03 TBR4 CSA C22.2 no. 950 NRTL/C EN55022, EN55024 EN60950 Safety

Switch Interoperability: Standard switches including

AT&T 4ESS and 5ESS NTT (Japan) INSnet 1500 Nortel DMS-100 US National ISDN-2 AUS (E1 only) NET5 (E1 only)

Physical Properties

Slot Requirements: Single cPCI slot Rear Card (Imperial): 9.32 L x 3.44 H x 0.8 D Front Card (Imperial): 9.32 L x 6.64 H x 0.8 D Note: Measurements are approximate and do not include card faceplate and RJ48C connectors

MTBF
Front 8 DSP	32 years
Rear 8 Span	207 years

DSP

Motorola 56303 at 100 MHz

Power Requirements: Typical values for a worst-case operating scenario
Quad Span T1	1.76A max @ +3.3 volts
Octal Span T1	2.95A max @ +3.3 volts
V-engine	725mA max @ +3.3 volts (6 DSP Variant)

Environmental Requirements
Operating Temperature	0 °C to +60 °C
Storage Temperature	-20 °C to +85 °C
Humidity	5 to 95%, non-condensing

RoHS
All PIKA products are RoHS compliant.