PIKA TECHNOLOGIES INC.
Printer Friendly Printer Friendly RSS Contact Us Contact Us   Search Search Home
 
       
   
Analog Trunk/FXO PCIe Boards (HMP)

PIKA Analog Trunk FXO Boards with Host Based Media Processing (HMP) provide up to 16 analog trunk ports with an additional 4 or 8 ports on an expansion module. You can also have a hybrid FXO/FXS configuration by adding a 4 or 8-port analog trunk expansion module.  Highly flexible, they are software-configurable for use in multiple countries.

This 9.5 inch board features the new PCI Express format, and will easily integrate into a PC chassis. Media processing is performed using PIKA’s host-based (HMP) software resources.

These boards are ideal for traditional telephony applications as well as for logging, fax and VoIP applications. The boards enable voice and fax services by way of connectivity to TDM and IP networks.  4 ports fax per system included at no additional cost.

PIKA Analog Trunk/FXO Boards, and PIKA MonteCarlo SDK with Host Based media processing (HMP) represent a complete and scalable set of reliable building blocks for the development of feature-rich communications solutions.


 


     see 360° rotating board
   Download pdf Datasheet

 
  • Single slot PCIe card
  • Only 9.5 inches long
  • Capable of providing combinations of loop start and passive/high impedance logging of analog line circuits
  • Available in densities ranging from 4 - 24 analog line circuits with 4 - 16 on the baseboard (software license enabled) in 4-port increments and an additional 4 or 8 ports on the expansion module
    Available in a hybrid FXO/FXS configuration by adding a 4 or 8-port analog station (FXS) module
  • Superior host-based echo cancellation and RTP packetization available (suitable for analog to IP gateway applications)
  • Advanced host-based media processing capabilities including voice, tone and conferencing
  • Low latency host-based switching between PIKA’s Boards
  • Windows and Linux development environments via PIKA’s low and high level APIs 


 

 

Analog Trunk FXO with
FXO Expansion Module

 

 

Analog Trunk FXO with
FXS Expansion Module

Key Features

 


 

 

 

 

 

 

 

 

 

 

Technical Specifications

PCIe Bus Interface
PCIe Bus Speed 2.5 GHz, single lane link
Memory Address Allocation Automatically assigned by Plug and Play cycle
Interrupts Allocation Automatically assigned by Plug and Play cycle
Physical Properties
Slot Requirements PCIe 9.5” slot
Dimensions (Metric) 241 mm L x 98 mm H x 18.5 mm D
Dimensions (Imperial) 9.5” L x 3.875” H x 0.74” D
Power Requirements
Power consumption from 3.3V rail 2 W max
Power consumption from LS lines
North America 1.4 W
European Union 2.0 W
Environment Requirements
Operating Temperature 0 °C to +60 °C
Storage Temperature -20 °C to +85 °C
Humidity, non-condensing 5% to 95%
Mean Time Between Failure (MTBF) 31 years
Telephony Interfaces

FXO Trunk Interfaces

FXS Analog Interfaces

4 - 16 FXO trunk interface ports plus an additional 4 or 8 ports on the FXO expansion module

4 or 8 FXS station ports with FXS expansion module
AC Impedance (in audio band)
Off-Hook 600 ohms
On-Hook Metallic (Tip to Ring) >300 k ohms
Return Loss >26.8 dB
DC Current
Loop Current Range 13 – 110 mA
DC Resistance
Longitudinal (tip to ground, ring to ground) >9.8 M ohms
On-Hook Metallic (Tip to Ring) >6.5 M ohms
Off-Hook Metallic (Tip to Ring) 310 ohms @ 20 mA
117 ohms @ 100 mA
Ringing
Ring Detection 14 Vrms @16 Hz
14 Vrms @20 Hz
12 Vrms @68 Hz
Ringer Impedance (20 Hz) > 26 M ohm
Ringer Equivalence Number (REN) 0.1B
Gain Tolerance (Linearity)
On-Hook In (2 to 4 wire) NA 0.0 to 0.8 dB (300-3400 Hz)
Off-Hook In (2 to 4 wire) NA -1.5 to -0.4 dB (300-3400 Hz)
Off-Hook Out (4 to 2 wire) -4.8 to -0.7 dB(300-3400 Hz)
Gain Range
Fixed - On-Hook H/W Gain In (2 to 4 wire) -1.6 dB
Fixed - Off-Hook H/W Gain In (2 to 4 wire) -0.75 dB
Fixed - Off-Hook H/W Gain Out (4 to 2 wire) +0.24 dB
On-Hook Signal overload level @0 dB gain In (2 to 4 wire) +4.77 dBm
Off-Hook Signal overload level @0 dB gain In (2 to 4 wire) +3.92 dBm
Misc.
Trans-hybrid loss (THL) 

>27 dB (300-3400) 

On-Hook Common Mode Gain 

-52.9 dBm0 avg. 

Signal to Noise Ratio (15 dBm, 1 KHz reference) 

> 38 dB 

On-Hook Inter Hybrid (Interface) Crosstalk 

No measurable crosstalk 

Off-Hook Inter Hybrid (Interface) Crosstalk 

No measurable crosstalk 

Idle Channel Noise 

6 dBrnc 

Transverse Balance 

> 57 dB 

Supervision 

Ring Detection, Loop Disconnect, Reversal Detection, Loop Voltage, Loop Current 

Signalling 

Off Hook,Flash, DTMF, Pulse Dial 

Onhook Audio Detect

Caller ID, DTMF, Audio Logging

Note: All dimensions are approximate and do not include board faceplate and RJ-21 connector. Proper system cooling, which will vary based on system design, is required to maintain an acceptable operating temperature.

RoHS
All PIKA products are RoHS compliant.
 

Warranty
PIKA provides a 3-year warranty on all boards.

 
 
PIKA