PIKA Analog Station FXS Boards provide up to 12 analog station ports on the baseboard and an additional 8 ports on the expansion module. You can also have a hybrid FXS/FXO configuration by adding a 4 or 8-port analog trunk expansion module. Highly flexible, they are software-configurable for use in multiple countries. This 9.5 inch board features the PCI Express format, and will easily integrate into a PC chassis. Media processing is performed using PIKA’s Host Media Processing (HMP) software resources. These boards are ideal for traditional telephony applications as well as for logging, fax and VoIP applications. The boards enable voice and fax services by way of connectivity to TDM and IP networks.  4 ports fax included at no additional cost (per system). PIKA Analog Station FXS Boards, PIKA MonteCarlo SDK with HMP processing represent a complete and scalable set of reliable building blocks for the development of feature-rich communications solutions. Key Features Single slot PCIe card Only 9.5 inches long Available in densities ranging from 4 - 20 analog phone line circuits with 4 - 12 on the baseboard (software license enabled in 4-port increments) and an additional 4 or 8 ports on the expansion module Available in a hybrid FXS/FXO configuration by adding a 4 or 8-port analog trunk (FXO) module Superior host-based echo cancellation and RTP packetization available (suitable for analog to IP gateway applications) Advanced host-based media processing capabilities includes voice, tone and conferencing Low latency host-based switching between PIKA’s HMP Boards Windows and Linux development environments via PIKA’s low and high level APIs No external power supply needed for Ring Voltage

see 360° rotating board               Download pdf Datasheet                                          Analog Station FXS with                  FXS Expansion Module                              Analog Station FXS with                    FXO Expansion Module

Technical Specifications

Host Interface
PCIe Bus Interface	Based on PCIe revision 1.0a specifications
PCIe Bus Speed	2.5 GHz, single lane link
Memory Address Allocation	Automatically assigned by Plug and Play cycle
Interrupts Allocation	Automatically assigned by Plug and Play cycle
Physical Properties
Slot Requirements	PCIe 9.5” slot
Dimensions (Metric)	241 mm L x 98 mm H x 18.5 mm D
Dimensions (Imperial)	9.5” L x 3.875” H x 0.74” D
Power Requirements
Power consumption from 12V rail	4.7W
Power comsumption from 12V rail	13W
Peak Current from 12V rail	2.7A
Environment Requirements
Operating Temperature	0 °C to +60 °C
Storage Temperature	-20 °C to +85 °C
Humidity, non-condensing	5% to 95%
Mean Time Between Failure (MTBF)	35 years
Telephony Interfaces
FXS Analog Interfaces FXO Trunk Interfaces	4 - 12 (up to 20 with the FXS expansion module) 4 or 8 with FXO expansion module
AC Impedance (in audio band)
Off-Hook	600 ohms or TBR21 complex impedance
Return Loss	>30 dB
DC Feed
Open Loop Voltage	48V
Constant Loop Current	20 mA
Max Loop Length	4kft
Ringer Equivalence Number Supported
REN	1

Note: All dimensions are approximate and do not include board faceplate and RJ-21 connector. Proper system cooling, which will vary based on system design, is required to maintain an acceptable operating temperature.

RoHS 
All PIKA products are RoHS compliant.

Warranty
PIKA provides a 3-year warranty on all boards.