|
|
Highly scalable, PIKA High Density Analog Boards with DSPs (formerly Daytona MM) are configurable from 4 to 24 analog line circuits depending on your unique needs. There is switching and DSP capacity for every channel. A full-length, standard sized PCI card, it will easily integrate into any PC chassis. It features H.100 compatibility.
PIKA High-density Analog Boards give you the flexibility to mix and match any combination of trunk and station ports on a single PCI card.
These boards are ideal for traditional telephony applications as well as for logging, fax, and VoIP applications. They enable voice and fax services by way of connectivity to TDM and IP networks. 4 ports fax included at no additional cost
.
Key Features
|
|
|
see 360° rotating board
 Download pdf Datasheet
|
- Single slot PCI card
- Capable of providing combinations of loop start, station and passive/high impedance logging of analog line circuits
- Available in densities ranging from 4-24 analog line circuits
- DSP based echo cancellation and RTP packetization available (suitable for analog to IP gateway applications)
- Advanced DSP based media processing capabilities include voice, tone, fax and conferencing
- 25% of the ports for fax are enabled for free
- H.100 compatible, full on board switching available
- Windows and Linux development environments via PIKA’s low and high level APIs
- Compatible with other popular technologies such as Skype, Asterisk® and eurovoice.
|
Functionality:
|
Specifications: |
| Analog Line Circuits |
4 to 24 |
| Computer Telephony (CT) Bus Type |
H.100 |
| Bus Data Rate (H.100) |
2, 4, 8 MHz |
| CT Bus Switch Connections |
up to 512 simultaneous half duplex connections can be made between any of the 4096 CT bus timeslots and any of the local timeslots |
| PC Host Interface Type |
PCI (universal signalling) |
| Maximum V-Engines |
1 (Motorola 56303 DSP based) |
DSPs:
On-board DSPs
Chip Type
Memory
Clock Speed
Instruction Speed |
1
Motorola 56303 (see note)
128 K
100 MHz
100 MIPS |
| Supported Operating Systems (OS) |
Windows 2000/XP/2003
Red Hat 7.3/Enterprise 4 SuSE 9.3 distributions of Linux |
Note: DSP applications are independent programs that perform operations such as dual tone multi frequency (DTMF) detection, speech compression, conferencing, and speech recognition or tone detection. DSP applications are a key ingredient of the innovative AllOnBoard architecture. The number of supported applications is limited only by the amount of available memory and real time. V-Engine is an add-on expansion card with up to 6 extra DSPs that attach to a high-density Analog Board. V-Engines are used to expand the available signal-processing horsepower for use in DSP applications such as Conferencing, Audio playback/record and Echo Cancellation
Technical Specifications
| Host Interface |
| PCI Interface |
PCI 32 bit target/initiator V2.2 compliant
33 MHz bus speed |
| Network Interface |
50 pin Amphenol; RJ21 (optional 12 x RJ14 breakout)x |
| Telephony Interfaces: |
Loop Start (standard mode or passive logging mode) |
| DC Resistance |
| North American |
330 ohms (@ 20 mA) to 127 ohms (@ 105 mA) |
| European |
420 ohms (@ 14 mA) to 89 ohms (@ 150 mA) |
| DC Loop Current |
| North American |
20 mA to 105 mA (operating range) |
| European |
14 mA to 150 mA (operating range)
|
| AC Impedance |
| North American |
600 ohms (off hook), >350 K ohms (on hook) |
| European |
Complex as per TBR21 spec (off hook), >350 K ohms (on hook) |
| Supervision |
North American Ringing voltage (15.3 - 68 Hz, >= 32 VRMS), loop current disconnect
European Ringing voltage (16 - 60 Hz, >=25 VRMS), loop current disconnect |
| Signaling |
Off hook, Flash, DTMF
On Hook Audio Detect
Caller ID, DTMF (KT23), Audio Logging |
| DC Triggering |
3V, 18V, or 33V programmable threshold |
| Telephony Interface: Station Interface (SLIC) |
| Current Limiting |
Constant at 30 mA |
| AC Impedance |
600 ohms |
| Loop Range |
0-750 ohms @ -24VDC |
| Supervision |
Off hook, Flash, Ring Trip, DTMF |
| Signaling |
Ringing (externally sourced), Cadence and Power Management Under Software Control |
| Maximum Ringing Load |
2 Ren/line |
| Compliance and Capabilities |
FCC part 15 and FCC Part 68
Industry Canada CS-03
CSA C22.2 no. 950 NRTL/C
TBR21
EU 55022:1998 Class B
EU 55024:1998
EU 60950:1992
2002 / 95 / EC RoHS 6 |
| DSPs |
Motorola 56303
Software reset on per DSP basis |
| MTBF |
|
Daytona Baseboard
Daytona Loop Start Module
Daytona Station Module
V-Engine
|
68 years
280 years
244 years
144 years |
| Power Requirements |
12LC
24LC
12P
24P
4LC/8P
8LC/16P
MM Series V-engine |
770mA max @ +5 Volts
960mA max @ +5 Volts
1060mA max @ +5 Volts
1540mA max @ +5 Volts
960mA max @ +5 Volts
1350mA max @ +5 Volts
890mA max @ +5 volts |
| Environmental Requirements |
| Operating Temperature |
0 °C to +60 °C |
| Storage Temperature |
-20 °C to +85 °C |
| Humidity |
5 to 95%, non-condensing |
| Media Capabilities |
Play and record
DTMF, tone, speech detection
DTMF, tone generation
Fax
RTP, IP/SIP
Integration with Asterisk, Skype technologies |
Note: Typical values.
RoHS
All PIKA products are RoHS compliant.
|